F-40Ⅲ [NC Roll Feeder]
F-40Ⅲ
Optimal acceleration is automatically calculated and controlled based on the inputted feed length and the SPM setting values.
Hard chrome plated feed rolls are standard.
Photograph
| Material Width[mm] |
30 - 200
30 - 150
|
| Material Thickness[mm] |
0.3 - 2.3
0.3 - 3.2
|
| Feed Length[mm] |
1 - 9999.99 |
| Feed Speed[m/min] |
- |
| Feed Accuracy[mm] |
±0.1 or less |
| Passline Height[mm] |
|
| Power Source Capacity[kVA] |
2.5 |
| Required Power Source[V,HZ] |
AC 200/220, 50/60 Hz, 3-phase |
| Required Air Pressure[MPa] |
0.5 |
|
| Standard Equipment |
Air Release
Standard mounting plates
Hard chrome plated rolls
|
| Optional Equipment |
Special mounting plates
Entry apron rolls
Feeder Master
|
|
